[−][src]Struct pbrt::samplers::halton::HaltonSampler
Fields
samples_per_pixel: i64
radical_inverse_permutations: Vec<u16>
base_scales: Point2i
base_exponents: Point2i
sample_stride: u64
mult_inverse: [i64; 2]
pixel_for_offset: RwLock<Point2i>
offset_for_current_pixel: RwLock<u64>
sample_at_pixel_center: bool
dimension: i64
interval_sample_index: u64
array_start_dim: i64
array_end_dim: i64
current_pixel: Point2i
current_pixel_sample_index: i64
samples_1d_array_sizes: Vec<i32>
samples_2d_array_sizes: Vec<i32>
sample_array_1d: Vec<Vec<Float>>
sample_array_2d: Vec<Vec<Point2f>>
array_1d_offset: usize
array_2d_offset: usize
Methods
impl HaltonSampler[src]
impl HaltonSamplerpub fn new(
samples_per_pixel: i64,
sample_bounds: Bounds2i,
sample_at_pixel_center: bool
) -> Self[src]
pub fn new(
samples_per_pixel: i64,
sample_bounds: Bounds2i,
sample_at_pixel_center: bool
) -> Selfpub fn get_index_for_sample(&self, sample_num: u64) -> u64[src]
pub fn get_index_for_sample(&self, sample_num: u64) -> u64pub fn sample_dimension(&self, index: u64, dim: i64) -> Float[src]
pub fn sample_dimension(&self, index: u64, dim: i64) -> FloatTrait Implementations
impl Sampler for HaltonSampler[src]
impl Sampler for HaltonSamplerfn start_pixel(&mut self, p: &Point2i)[src]
fn start_pixel(&mut self, p: &Point2i)fn get_1d(&mut self) -> Float[src]
fn get_1d(&mut self) -> Floatfn get_2d(&mut self) -> Point2f[src]
fn get_2d(&mut self) -> Point2ffn request_2d_array(&mut self, n: i32)[src]
fn request_2d_array(&mut self, n: i32)fn round_count(&self, count: i32) -> i32[src]
fn round_count(&self, count: i32) -> i32fn get_2d_array(&mut self, n: i32) -> Vec<Point2f>[src]
fn get_2d_array(&mut self, n: i32) -> Vec<Point2f>fn start_next_sample(&mut self) -> bool[src]
fn start_next_sample(&mut self) -> boolfn reseed(&mut self, _seed: u64)[src]
fn reseed(&mut self, _seed: u64)fn get_current_pixel(&self) -> Point2i[src]
fn get_current_pixel(&self) -> Point2ifn get_current_sample_number(&self) -> i64[src]
fn get_current_sample_number(&self) -> i64fn get_samples_per_pixel(&self) -> i64[src]
fn get_samples_per_pixel(&self) -> i64fn get_camera_sample(&mut self, p_raster: &Point2i) -> CameraSample[src]
fn get_camera_sample(&mut self, p_raster: &Point2i) -> CameraSampleimpl GlobalSampler for HaltonSampler[src]
impl GlobalSampler for HaltonSamplerimpl Clone for HaltonSampler[src]
impl Clone for HaltonSamplerfn clone(&self) -> HaltonSampler[src]
fn clone(&self) -> HaltonSamplerReturns a copy of the value. Read more
fn clone_from(&mut self, source: &Self)1.0.0[src]
fn clone_from(&mut self, source: &Self)Performs copy-assignment from source. Read more
Auto Trait Implementations
impl Send for HaltonSampler
impl Send for HaltonSamplerimpl Sync for HaltonSampler
impl Sync for HaltonSamplerBlanket Implementations
impl<T> SamplerClone for T where
T: 'static + Sampler + Clone + Send + Sync, [src]
impl<T> SamplerClone for T where
T: 'static + Sampler + Clone + Send + Sync, impl<T> From for T[src]
impl<T> From for Timpl<T, U> Into for T where
U: From<T>, [src]
impl<T, U> Into for T where
U: From<T>, impl<T> ToOwned for T where
T: Clone, [src]
impl<T> ToOwned for T where
T: Clone, type Owned = T
fn to_owned(&self) -> T[src]
fn to_owned(&self) -> TCreates owned data from borrowed data, usually by cloning. Read more
fn clone_into(&self, target: &mut T)[src]
fn clone_into(&self, target: &mut T)🔬 This is a nightly-only experimental API. (toowned_clone_into)
recently added
Uses borrowed data to replace owned data, usually by cloning. Read more
impl<T, U> TryFrom for T where
T: From<U>, [src]
impl<T, U> TryFrom for T where
T: From<U>, type Error = !
try_from)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>try_from)Performs the conversion.
impl<T> Borrow for T where
T: ?Sized, [src]
impl<T> Borrow for T where
T: ?Sized, impl<T> BorrowMut for T where
T: ?Sized, [src]
impl<T> BorrowMut for T where
T: ?Sized, fn borrow_mut(&mut self) -> &mut T[src]
fn borrow_mut(&mut self) -> &mut TMutably borrows from an owned value. Read more
impl<T, U> TryInto for T where
U: TryFrom<T>, [src]
impl<T, U> TryInto for T where
U: TryFrom<T>, type Error = <U as TryFrom<T>>::Error
try_from)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>try_from)Performs the conversion.
impl<T> Any for T where
T: 'static + ?Sized, [src]
impl<T> Any for T where
T: 'static + ?Sized, fn get_type_id(&self) -> TypeId[src]
fn get_type_id(&self) -> TypeId🔬 This is a nightly-only experimental API. (get_type_id)
this method will likely be replaced by an associated static
Gets the TypeId of self. Read more
impl<E> SpecializationError for E[src]
impl<E> SpecializationError for Efn not_found<S, T>(trait_name: &'static str, method_name: &'static str) -> E where
T: ?Sized, [src]
fn not_found<S, T>(trait_name: &'static str, method_name: &'static str) -> E where
T: ?Sized, 🔬 This is a nightly-only experimental API. (rustc_private)
this crate is being loaded from the sysroot, an unstable location; did you mean to load this crate from crates.io via Cargo.toml instead?
Create an error for a missing method specialization. Defaults to panicking with type, trait & method names. S is the encoder/decoder state type, T is the type being encoded/decoded, and the arguments are the names of the trait and method that should've been overridden. Read more
impl<T> Erased for T[src]
impl<T> Erased for Timpl<T> Send for T where
T: ?Sized, [src]
impl<T> Send for T where
T: ?Sized, impl<T> Sync for T where
T: ?Sized, [src]
impl<T> Sync for T where
T: ?Sized, impl<T> Erased for T[src]
impl<T> Erased for Timpl<T> SetParameter for T[src]
impl<T> SetParameter for Tfn set<T>(&mut self, value: T) -> <T as Parameter<Self>>::Result where
T: Parameter<Self>, [src]
fn set<T>(&mut self, value: T) -> <T as Parameter<Self>>::Result where
T: Parameter<Self>, Sets value as a parameter of self.
impl<T> Erased for T[src]
impl<T> Erased for T