Enum rayon::iter::Either

source · [−]
pub enum Either<L, R> {
    Left(L),
    Right(R),
}
Expand description

The enum Either with variants Left and Right is a general purpose sum type with two cases.

The Either type is symmetric and treats its variants the same way, without preference. (For representing success or error, use the regular Result enum instead.)

Variants

Left(L)

A value of type L.

Right(R)

A value of type R.

Implementations

Return true if the value is the Left variant.

use either::*;

let values = [Left(1), Right("the right value")];
assert_eq!(values[0].is_left(), true);
assert_eq!(values[1].is_left(), false);

Return true if the value is the Right variant.

use either::*;

let values = [Left(1), Right("the right value")];
assert_eq!(values[0].is_right(), false);
assert_eq!(values[1].is_right(), true);

Convert the left side of Either<L, R> to an Option<L>.

use either::*;

let left: Either<_, ()> = Left("some value");
assert_eq!(left.left(),  Some("some value"));

let right: Either<(), _> = Right(321);
assert_eq!(right.left(), None);

Convert the right side of Either<L, R> to an Option<R>.

use either::*;

let left: Either<_, ()> = Left("some value");
assert_eq!(left.right(),  None);

let right: Either<(), _> = Right(321);
assert_eq!(right.right(), Some(321));

Convert &Either<L, R> to Either<&L, &R>.

use either::*;

let left: Either<_, ()> = Left("some value");
assert_eq!(left.as_ref(), Left(&"some value"));

let right: Either<(), _> = Right("some value");
assert_eq!(right.as_ref(), Right(&"some value"));

Convert &mut Either<L, R> to Either<&mut L, &mut R>.

use either::*;

fn mutate_left(value: &mut Either<u32, u32>) {
    if let Some(l) = value.as_mut().left() {
        *l = 999;
    }
}

let mut left = Left(123);
let mut right = Right(123);
mutate_left(&mut left);
mutate_left(&mut right);
assert_eq!(left, Left(999));
assert_eq!(right, Right(123));

Convert Either<L, R> to Either<R, L>.

use either::*;

let left: Either<_, ()> = Left(123);
assert_eq!(left.flip(), Right(123));

let right: Either<(), _> = Right("some value");
assert_eq!(right.flip(), Left("some value"));

Apply the function f on the value in the Left variant if it is present rewrapping the result in Left.

use either::*;

let left: Either<_, u32> = Left(123);
assert_eq!(left.map_left(|x| x * 2), Left(246));

let right: Either<u32, _> = Right(123);
assert_eq!(right.map_left(|x| x * 2), Right(123));

Apply the function f on the value in the Right variant if it is present rewrapping the result in Right.

use either::*;

let left: Either<_, u32> = Left(123);
assert_eq!(left.map_right(|x| x * 2), Left(123));

let right: Either<u32, _> = Right(123);
assert_eq!(right.map_right(|x| x * 2), Right(246));

Apply one of two functions depending on contents, unifying their result. If the value is Left(L) then the first function f is applied; if it is Right(R) then the second function g is applied.

use either::*;

fn square(n: u32) -> i32 { (n * n) as i32 }
fn negate(n: i32) -> i32 { -n }

let left: Either<u32, i32> = Left(4);
assert_eq!(left.either(square, negate), 16);

let right: Either<u32, i32> = Right(-4);
assert_eq!(right.either(square, negate), 4);

Like either, but provide some context to whichever of the functions ends up being called.

// In this example, the context is a mutable reference
use either::*;

let mut result = Vec::new();

let values = vec![Left(2), Right(2.7)];

for value in values {
    value.either_with(&mut result,
                      |ctx, integer| ctx.push(integer),
                      |ctx, real| ctx.push(f64::round(real) as i32));
}

assert_eq!(result, vec![2, 3]);

Apply the function f on the value in the Left variant if it is present.

use either::*;

let left: Either<_, u32> = Left(123);
assert_eq!(left.left_and_then::<_,()>(|x| Right(x * 2)), Right(246));

let right: Either<u32, _> = Right(123);
assert_eq!(right.left_and_then(|x| Right::<(), _>(x * 2)), Right(123));

Apply the function f on the value in the Right variant if it is present.

use either::*;

let left: Either<_, u32> = Left(123);
assert_eq!(left.right_and_then(|x| Right(x * 2)), Left(123));

let right: Either<u32, _> = Right(123);
assert_eq!(right.right_and_then(|x| Right(x * 2)), Right(246));

Convert the inner value to an iterator.

use either::*;

let left: Either<_, Vec<u32>> = Left(vec![1, 2, 3, 4, 5]);
let mut right: Either<Vec<u32>, _> = Right(vec![]);
right.extend(left.into_iter());
assert_eq!(right, Right(vec![1, 2, 3, 4, 5]));

Return left value or given value

Arguments passed to left_or are eagerly evaluated; if you are passing the result of a function call, it is recommended to use left_or_else, which is lazily evaluated.

Examples
let left: Either<&str, &str> = Left("left");
assert_eq!(left.left_or("foo"), "left");

let right: Either<&str, &str> = Right("right");
assert_eq!(right.left_or("left"), "left");

Return left or a default

Examples
let left: Either<String, u32> = Left("left".to_string());
assert_eq!(left.left_or_default(), "left");

let right: Either<String, u32> = Right(42);
assert_eq!(right.left_or_default(), String::default());

Returns left value or computes it from a closure

Examples
let left: Either<String, u32> = Left("3".to_string());
assert_eq!(left.left_or_else(|_| unreachable!()), "3");

let right: Either<String, u32> = Right(3);
assert_eq!(right.left_or_else(|x| x.to_string()), "3");

Return right value or given value

Arguments passed to right_or are eagerly evaluated; if you are passing the result of a function call, it is recommended to use right_or_else, which is lazily evaluated.

Examples
let right: Either<&str, &str> = Right("right");
assert_eq!(right.right_or("foo"), "right");

let left: Either<&str, &str> = Left("left");
assert_eq!(left.right_or("right"), "right");

Return right or a default

Examples
let left: Either<String, u32> = Left("left".to_string());
assert_eq!(left.right_or_default(), u32::default());

let right: Either<String, u32> = Right(42);
assert_eq!(right.right_or_default(), 42);

Returns right value or computes it from a closure

Examples
let left: Either<String, u32> = Left("3".to_string());
assert_eq!(left.right_or_else(|x| x.parse().unwrap()), 3);

let right: Either<String, u32> = Right(3);
assert_eq!(right.right_or_else(|_| unreachable!()), 3);

Returns the left value

Examples
let left: Either<_, ()> = Left(3);
assert_eq!(left.unwrap_left(), 3);
Panics

When Either is a Right value

ⓘ
let right: Either<(), _> = Right(3);
right.unwrap_left();

Returns the right value

Examples
let right: Either<(), _> = Right(3);
assert_eq!(right.unwrap_right(), 3);
Panics

When Either is a Left value

ⓘ
let left: Either<_, ()> = Left(3);
left.unwrap_right();

Returns the left value

Examples
let left: Either<_, ()> = Left(3);
assert_eq!(left.expect_left("value was Right"), 3);
Panics

When Either is a Right value

ⓘ
let right: Either<(), _> = Right(3);
right.expect_left("value was Right");

Returns the right value

Examples
let right: Either<(), _> = Right(3);
assert_eq!(right.expect_right("value was Left"), 3);
Panics

When Either is a Left value

ⓘ
let left: Either<_, ()> = Left(3);
left.expect_right("value was Right");

Convert the contained value into T

Examples
// Both u16 and u32 can be converted to u64.
let left: Either<u16, u32> = Left(3u16);
assert_eq!(left.either_into::<u64>(), 3u64);
let right: Either<u16, u32> = Right(7u32);
assert_eq!(right.either_into::<u64>(), 7u64);

Factors out None from an Either of Option.

use either::*;
let left: Either<_, Option<String>> = Left(Some(vec![0]));
assert_eq!(left.factor_none(), Some(Left(vec![0])));

let right: Either<Option<Vec<u8>>, _> = Right(Some(String::new()));
assert_eq!(right.factor_none(), Some(Right(String::new())));

Factors out a homogenous type from an Either of Result.

Here, the homogeneous type is the Err type of the Result.

use either::*;
let left: Either<_, Result<String, u32>> = Left(Ok(vec![0]));
assert_eq!(left.factor_err(), Ok(Left(vec![0])));

let right: Either<Result<Vec<u8>, u32>, _> = Right(Ok(String::new()));
assert_eq!(right.factor_err(), Ok(Right(String::new())));

Factors out a homogenous type from an Either of Result.

Here, the homogeneous type is the Ok type of the Result.

use either::*;
let left: Either<_, Result<u32, String>> = Left(Err(vec![0]));
assert_eq!(left.factor_ok(), Err(Left(vec![0])));

let right: Either<Result<u32, Vec<u8>>, _> = Right(Err(String::new()));
assert_eq!(right.factor_ok(), Err(Right(String::new())));

Factor out a homogeneous type from an either of pairs.

Here, the homogeneous type is the first element of the pairs.

use either::*;
let left: Either<_, (u32, String)> = Left((123, vec![0]));
assert_eq!(left.factor_first().0, 123);

let right: Either<(u32, Vec<u8>), _> = Right((123, String::new()));
assert_eq!(right.factor_first().0, 123);

Factor out a homogeneous type from an either of pairs.

Here, the homogeneous type is the second element of the pairs.

use either::*;
let left: Either<_, (String, u32)> = Left((vec![0], 123));
assert_eq!(left.factor_second().1, 123);

let right: Either<(Vec<u8>, u32), _> = Right((String::new(), 123));
assert_eq!(right.factor_second().1, 123);

Extract the value of an either over two equivalent types.

use either::*;

let left: Either<_, u32> = Left(123);
assert_eq!(left.into_inner(), 123);

let right: Either<u32, _> = Right(123);
assert_eq!(right.into_inner(), 123);

Map f over the contained value and return the result in the corresponding variant.

use either::*;

let value: Either<_, i32> = Right(42);

let other = value.map(|x| x * 2);
assert_eq!(other, Right(84));

Trait Implementations

Converts this type into a mutable reference of the (usually inferred) input type.

Converts this type into a mutable reference of the (usually inferred) input type.

Converts this type into a mutable reference of the (usually inferred) input type.

Converts this type into a shared reference of the (usually inferred) input type.

Converts this type into a shared reference of the (usually inferred) input type.

Converts this type into a shared reference of the (usually inferred) input type.

Returns a copy of the value. Read more

Performs copy-assignment from source. Read more

Formats the value using the given formatter. Read more

The resulting type after dereferencing.

Dereferences the value.

Mutably dereferences the value.

Formats the value using the given formatter. Read more

Removes and returns an element from the end of the iterator. Read more

An iterator method that reduces the iterator’s elements to a single, final value, starting from the back. Read more

Searches for an element of an iterator from the back that satisfies a predicate. Read more

🔬 This is a nightly-only experimental API. (iter_advance_by)

Advances the iterator from the back by n elements. Read more

Returns the nth element from the end of the iterator. Read more

This is the reverse version of Iterator::try_fold(): it takes elements starting from the back of the iterator. Read more

Returns the exact length of the iterator. Read more

🔬 This is a nightly-only experimental API. (exact_size_is_empty)

Returns true if the iterator is empty. Read more

Extends a collection with the contents of an iterator. Read more

🔬 This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

🔬 This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements. Read more

Convert from Result to Either with Ok => Right and Err => Left.

Converts to this type from the input type.

Creates an instance of the collection from the parallel iterator par_iter. Read more

Feeds this value into the given Hasher. Read more

Feeds a slice of this type into the given Hasher. Read more

Internal method used to define the behavior of this parallel iterator. You should not need to call this directly. Read more

Produces an exact count of how many items this iterator will produce, presuming no panic occurs. Read more

Internal method used to define the behavior of this parallel iterator. You should not need to call this directly. Read more

Collects the results of the iterator into the specified vector. The vector is always truncated before execution begins. If possible, reusing the vector across calls can lead to better performance since it reuses the same backing buffer. Read more

Unzips the results of the iterator into the specified vectors. The vectors are always truncated before execution begins. If possible, reusing the vectors across calls can lead to better performance since they reuse the same backing buffer. Read more

Iterates over tuples (A, B), where the items A are from this iterator and B are from the iterator given as argument. Like the zip method on ordinary iterators, if the two iterators are of unequal length, you only get the items they have in common. Read more

The same as Zip, but requires that both iterators have the same length. Read more

Interleaves elements of this iterator and the other given iterator. Alternately yields elements from this iterator and the given iterator, until both are exhausted. If one iterator is exhausted before the other, the last elements are provided from the other. Read more

Interleaves elements of this iterator and the other given iterator, until one is exhausted. Read more

Splits an iterator up into fixed-size chunks. Read more

Lexicographically compares the elements of this ParallelIterator with those of another. Read more

Lexicographically compares the elements of this ParallelIterator with those of another. Read more

Determines if the elements of this ParallelIterator are equal to those of another Read more

Determines if the elements of this ParallelIterator are unequal to those of another Read more

Determines if the elements of this ParallelIterator are lexicographically less than those of another. Read more

Determines if the elements of this ParallelIterator are less or equal to those of another. Read more

Determines if the elements of this ParallelIterator are lexicographically greater than those of another. Read more

Determines if the elements of this ParallelIterator are less or equal to those of another. Read more

Yields an index along with each item. Read more

Creates an iterator that steps by the given amount Read more

Creates an iterator that skips the first n elements. Read more

Creates an iterator that yields the first n elements. Read more

Searches for some item in the parallel iterator that matches the given predicate, and returns its index. Like ParallelIterator::find_any, the parallel search will not necessarily find the first match, and once a match is found we’ll attempt to stop processing any more. Read more

Searches for the sequentially first item in the parallel iterator that matches the given predicate, and returns its index. Read more

Searches for the sequentially last item in the parallel iterator that matches the given predicate, and returns its index. Read more

Searches for items in the parallel iterator that match the given predicate, and returns their indices. Read more

Produces a new iterator with the elements of this iterator in reverse order. Read more

Sets the minimum length of iterators desired to process in each rayon job. Rayon will not split any smaller than this length, but of course an iterator could already be smaller to begin with. Read more

Sets the maximum length of iterators desired to process in each rayon job. Rayon will try to split at least below this length, unless that would put it below the length from with_min_len(). For example, given min=10 and max=15, a length of 16 will not be split any further. Read more

Convert from Either to Result with Right => Ok and Left => Err.

Converts this type into the (usually inferred) input type.

Either<L, R> is an iterator if both L and R are iterators.

The type of the elements being iterated over.

Advances the iterator and returns the next value. Read more

Returns the bounds on the remaining length of the iterator. Read more

Folds every element into an accumulator by applying an operation, returning the final result. Read more

Calls a closure on each element of an iterator. Read more

Consumes the iterator, counting the number of iterations and returning it. Read more

Consumes the iterator, returning the last element. Read more

Returns the nth element of the iterator. Read more

Transforms an iterator into a collection. Read more

Consumes an iterator, creating two collections from it. Read more

Tests if every element of the iterator matches a predicate. Read more

Tests if any element of the iterator matches a predicate. Read more

Searches for an element of an iterator that satisfies a predicate. Read more

Applies function to the elements of iterator and returns the first non-none result. Read more

Searches for an element in an iterator, returning its index. Read more

🔬 This is a nightly-only experimental API. (iter_advance_by)

Advances the iterator by n elements. Read more

Creates an iterator starting at the same point, but stepping by the given amount at each iteration. Read more

Takes two iterators and creates a new iterator over both in sequence. Read more

‘Zips up’ two iterators into a single iterator of pairs. Read more

🔬 This is a nightly-only experimental API. (iter_intersperse)

Creates a new iterator which places a copy of separator between adjacent items of the original iterator. Read more

🔬 This is a nightly-only experimental API. (iter_intersperse)

Creates a new iterator which places an item generated by separator between adjacent items of the original iterator. Read more

Takes a closure and creates an iterator which calls that closure on each element. Read more

Creates an iterator which uses a closure to determine if an element should be yielded. Read more

Creates an iterator that both filters and maps. Read more

Creates an iterator which gives the current iteration count as well as the next value. Read more

Creates an iterator which can use the peek and peek_mut methods to look at the next element of the iterator without consuming it. See their documentation for more information. Read more

Creates an iterator that skips elements based on a predicate. Read more

Creates an iterator that yields elements based on a predicate. Read more

Creates an iterator that both yields elements based on a predicate and maps. Read more

Creates an iterator that skips the first n elements. Read more

Creates an iterator that yields the first n elements, or fewer if the underlying iterator ends sooner. Read more

An iterator adapter similar to fold that holds internal state and produces a new iterator. Read more

Creates an iterator that works like map, but flattens nested structure. Read more

Creates an iterator that flattens nested structure. Read more

Creates an iterator which ends after the first None. Read more

Does something with each element of an iterator, passing the value on. Read more

Borrows an iterator, rather than consuming it. Read more

🔬 This is a nightly-only experimental API. (iterator_try_collect)

Fallibly transforms an iterator into a collection, short circuiting if a failure is encountered. Read more

🔬 This is a nightly-only experimental API. (iter_collect_into)

Collects all the items from an iterator into a collection. Read more

🔬 This is a nightly-only experimental API. (iter_partition_in_place)

Reorders the elements of this iterator in-place according to the given predicate, such that all those that return true precede all those that return false. Returns the number of true elements found. Read more

🔬 This is a nightly-only experimental API. (iter_is_partitioned)

Checks if the elements of this iterator are partitioned according to the given predicate, such that all those that return true precede all those that return false. Read more

An iterator method that applies a function as long as it returns successfully, producing a single, final value. Read more

An iterator method that applies a fallible function to each item in the iterator, stopping at the first error and returning that error. Read more

Reduces the elements to a single one, by repeatedly applying a reducing operation. Read more

🔬 This is a nightly-only experimental API. (iterator_try_reduce)

Reduces the elements to a single one by repeatedly applying a reducing operation. If the closure returns a failure, the failure is propagated back to the caller immediately. Read more

🔬 This is a nightly-only experimental API. (try_find)

Applies function to the elements of iterator and returns the first true result or the first error. Read more

Searches for an element in an iterator from the right, returning its index. Read more

Returns the maximum element of an iterator. Read more

Returns the minimum element of an iterator. Read more

Returns the element that gives the maximum value from the specified function. Read more

Returns the element that gives the maximum value with respect to the specified comparison function. Read more

Returns the element that gives the minimum value from the specified function. Read more

Returns the element that gives the minimum value with respect to the specified comparison function. Read more

Reverses an iterator’s direction. Read more

Converts an iterator of pairs into a pair of containers. Read more

Creates an iterator which copies all of its elements. Read more

Creates an iterator which clones all of its elements. Read more

Repeats an iterator endlessly. Read more

Sums the elements of an iterator. Read more

Iterates over the entire iterator, multiplying all the elements Read more

Lexicographically compares the elements of this Iterator with those of another. Read more

🔬 This is a nightly-only experimental API. (iter_order_by)

Lexicographically compares the elements of this Iterator with those of another with respect to the specified comparison function. Read more

Lexicographically compares the elements of this Iterator with those of another. Read more

🔬 This is a nightly-only experimental API. (iter_order_by)

Lexicographically compares the elements of this Iterator with those of another with respect to the specified comparison function. Read more

Determines if the elements of this Iterator are equal to those of another. Read more

🔬 This is a nightly-only experimental API. (iter_order_by)

Determines if the elements of this Iterator are equal to those of another with respect to the specified equality function. Read more

Determines if the elements of this Iterator are unequal to those of another. Read more

Determines if the elements of this Iterator are lexicographically less than those of another. Read more

Determines if the elements of this Iterator are lexicographically less or equal to those of another. Read more

Determines if the elements of this Iterator are lexicographically greater than those of another. Read more

Determines if the elements of this Iterator are lexicographically greater than or equal to those of another. Read more

🔬 This is a nightly-only experimental API. (is_sorted)

Checks if the elements of this iterator are sorted. Read more

🔬 This is a nightly-only experimental API. (is_sorted)

Checks if the elements of this iterator are sorted using the given comparator function. Read more

🔬 This is a nightly-only experimental API. (is_sorted)

Checks if the elements of this iterator are sorted using the given key extraction function. Read more

This method returns an Ordering between self and other. Read more

Compares and returns the maximum of two values. Read more

Compares and returns the minimum of two values. Read more

Restrict a value to a certain interval. Read more

Extends an instance of the collection with the elements drawn from the parallel iterator par_iter. Read more

Either<L, R> can be extended if both L and R are parallel extendable.

Extends an instance of the collection with the elements drawn from the parallel iterator par_iter. Read more

Either<L, R> is a parallel iterator if both L and R are parallel iterators.

The type of item that this parallel iterator produces. For example, if you use the for_each method, this is the type of item that your closure will be invoked with. Read more

Internal method used to define the behavior of this parallel iterator. You should not need to call this directly. Read more

Internal method used to define the behavior of this parallel iterator. You should not need to call this directly. Read more

Executes OP on each item produced by the iterator, in parallel. Read more

Executes OP on the given init value with each item produced by the iterator, in parallel. Read more

Executes OP on a value returned by init with each item produced by the iterator, in parallel. Read more

Executes a fallible OP on each item produced by the iterator, in parallel. Read more

Executes a fallible OP on the given init value with each item produced by the iterator, in parallel. Read more

Executes a fallible OP on a value returned by init with each item produced by the iterator, in parallel. Read more

Counts the number of items in this parallel iterator. Read more

Applies map_op to each item of this iterator, producing a new iterator with the results. Read more

Applies map_op to the given init value with each item of this iterator, producing a new iterator with the results. Read more

Applies map_op to a value returned by init with each item of this iterator, producing a new iterator with the results. Read more

Creates an iterator which clones all of its elements. This may be useful when you have an iterator over &T, but you need T, and that type implements Clone. See also copied(). Read more

Creates an iterator which copies all of its elements. This may be useful when you have an iterator over &T, but you need T, and that type implements Copy. See also cloned(). Read more

Applies inspect_op to a reference to each item of this iterator, producing a new iterator passing through the original items. This is often useful for debugging to see what’s happening in iterator stages. Read more

Mutates each item of this iterator before yielding it. Read more

Applies filter_op to each item of this iterator, producing a new iterator with only the items that gave true results. Read more

Applies filter_op to each item of this iterator to get an Option, producing a new iterator with only the items from Some results. Read more

Applies map_op to each item of this iterator to get nested parallel iterators, producing a new parallel iterator that flattens these back into one. Read more

Applies map_op to each item of this iterator to get nested serial iterators, producing a new parallel iterator that flattens these back into one. Read more

An adaptor that flattens parallel-iterable Items into one large iterator. Read more

An adaptor that flattens serial-iterable Items into one large iterator. Read more

Reduces the items in the iterator into one item using op. The argument identity should be a closure that can produce “identity” value which may be inserted into the sequence as needed to create opportunities for parallel execution. So, for example, if you are doing a summation, then identity() ought to produce something that represents the zero for your type (but consider just calling sum() in that case). Read more

Reduces the items in the iterator into one item using op. If the iterator is empty, None is returned; otherwise, Some is returned. Read more

Reduces the items in the iterator into one item using a fallible op. The identity argument is used the same way as in reduce(). Read more

Reduces the items in the iterator into one item using a fallible op. Read more

Parallel fold is similar to sequential fold except that the sequence of items may be subdivided before it is folded. Consider a list of numbers like 22 3 77 89 46. If you used sequential fold to add them (fold(0, |a,b| a+b), you would wind up first adding 0 + 22, then 22 + 3, then 25 + 77, and so forth. The parallel fold works similarly except that it first breaks up your list into sublists, and hence instead of yielding up a single sum at the end, it yields up multiple sums. The number of results is nondeterministic, as is the point where the breaks occur. Read more

Applies fold_op to the given init value with each item of this iterator, finally producing the value for further use. Read more

Performs a fallible parallel fold. Read more

Performs a fallible parallel fold with a cloneable init value. Read more

Sums up the items in the iterator. Read more

Multiplies all the items in the iterator. Read more

Computes the minimum of all the items in the iterator. If the iterator is empty, None is returned; otherwise, Some(min) is returned. Read more

Computes the minimum of all the items in the iterator with respect to the given comparison function. If the iterator is empty, None is returned; otherwise, Some(min) is returned. Read more

Computes the item that yields the minimum value for the given function. If the iterator is empty, None is returned; otherwise, Some(item) is returned. Read more

Computes the maximum of all the items in the iterator. If the iterator is empty, None is returned; otherwise, Some(max) is returned. Read more

Computes the maximum of all the items in the iterator with respect to the given comparison function. If the iterator is empty, None is returned; otherwise, Some(min) is returned. Read more

Computes the item that yields the maximum value for the given function. If the iterator is empty, None is returned; otherwise, Some(item) is returned. Read more

Takes two iterators and creates a new iterator over both. Read more

Searches for some item in the parallel iterator that matches the given predicate and returns it. This operation is similar to find on sequential iterators but the item returned may not be the first one in the parallel sequence which matches, since we search the entire sequence in parallel. Read more

Searches for the sequentially first item in the parallel iterator that matches the given predicate and returns it. Read more

Searches for the sequentially last item in the parallel iterator that matches the given predicate and returns it. Read more

Applies the given predicate to the items in the parallel iterator and returns any non-None result of the map operation. Read more

Applies the given predicate to the items in the parallel iterator and returns the sequentially first non-None result of the map operation. Read more

Applies the given predicate to the items in the parallel iterator and returns the sequentially last non-None result of the map operation. Read more

Searches for some item in the parallel iterator that matches the given predicate, and if so returns true. Once a match is found, we’ll attempt to stop process the rest of the items. Proving that there’s no match, returning false, does require visiting every item. Read more

Tests that every item in the parallel iterator matches the given predicate, and if so returns true. If a counter-example is found, we’ll attempt to stop processing more items, then return false. Read more

Creates an iterator over the Some items of this iterator, halting as soon as any None is found. Read more

Wraps an iterator with a fuse in case of panics, to halt all threads as soon as possible. Read more

Creates a fresh collection containing all the elements produced by this parallel iterator. Read more

Unzips the items of a parallel iterator into a pair of arbitrary ParallelExtend containers. Read more

Partitions the items of a parallel iterator into a pair of arbitrary ParallelExtend containers. Items for which the predicate returns true go into the first container, and the rest go into the second. Read more

Partitions and maps the items of a parallel iterator into a pair of arbitrary ParallelExtend containers. Either::Left items go into the first container, and Either::Right items go into the second. Read more

Intersperses clones of an element between items of this iterator. Read more

This method tests for self and other values to be equal, and is used by ==. Read more

This method tests for !=.

This method returns an ordering between self and other values if one exists. Read more

This method tests less than (for self and other) and is used by the < operator. Read more

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

This method tests greater than (for self and other) and is used by the > operator. Read more

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

Auto Trait Implementations

Blanket Implementations

Gets the TypeId of self. Read more

Immutably borrows from an owned value. Read more

Mutably borrows from an owned value. Read more

Returns the argument unchanged.

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

The type of the elements being iterated over.

Which kind of iterator are we turning this into?

Creates an iterator from a value. Read more

The parallel iterator type that will be created.

The type of item that the parallel iterator will produce.

Converts self into a parallel iterator. Read more

The alignment of pointer.

The type for initializers.

Initializes a with the given initializer. Read more

Dereferences the given pointer. Read more

Mutably dereferences the given pointer. Read more

Drops the object pointed to by the given pointer. Read more

The resulting type after obtaining ownership.

Creates owned data from borrowed data, usually by cloning. Read more

🔬 This is a nightly-only experimental API. (toowned_clone_into)

Uses borrowed data to replace owned data, usually by cloning. Read more

Converts the given value to a String. Read more

The type returned in the event of a conversion error.

Performs the conversion.

The type returned in the event of a conversion error.

Performs the conversion.